Use a Pneumatic Forklift
Pneumatic forklifts are common in shipping and warehouse operations. Also called pump trucks or pallet trucks, they are utilized in order to move products and materials around on wooden pallets utilizing metal forks mounted on a wheeled counterweight. The counterweight includes a pump which raises the forks off the ground. A pallet truck is designed to be operated by one person.
To prevent loosing control while raising heavy loads, pallet trucks must always be operated with care. Equipment must be checked prior to operating. Clear the wheels area of any obstructions. Make sure that the handle turns smoothly. The pallet should be carefully stacked to be able to ensure that nothing would fall off during transportation.
To be able to release air in the pump and lower the forks, squeeze the lever found on the inside of the metal loop on the end of the pallet truck's handle. The forks could then be pushed into the slots of the pallet. The forks should be at the center to ensure equal distribution of the pallet's weight across them. Lift the forks from the ground by pumping the handle of the pneumatic lift until the pallet has cleared the ground completely. Do not lift the pallet too high or the forklift can unbalance.
Move the pallet by pulling on the handle and then dragging it behind you. It is not safe to push the pallet in front of you because the thrust can cause it to go out of control. Take turns slowly and don't try to stop suddenly. Slowly stop, squeeze the lever, and the forks will lower to the ground. Lastly, remove the forks from the pallet by pulling them out. Return the pallet truck to its permanent location.