Reach Forklifts
In nearly all distribution facilities or warehouse environments, overall space is usually limited. If you could get a machine to operate in smaller spaces and aisles, the more storage space a company would be able manage. Thus, particular equipment has been intended to be utilized in extremely narrow aisles in order to maximize efficiency and space.
Reach Trucks
The specific reach lift truck has a mast that extends away from the body of the forklift. Usually, it is attached with a scissor apparatus. When the scissor is compacted or drawn in, the forklift becomes much narrower compared to the typical forklift.
Operator Position
Reach trucks are designed so the operator could stand while in operation of the machinery. This is a contrast to the standard lift truck where the operator is usually sitting. The standing operation area lessens the amount of room required for the driver compartment, enabling the equipment to accomplish an even smaller profile overall.
Space Saving
With a reach truck, aisles could be made as narrow as 7 feet. The majority of regular lift trucks require a minimum aisle space of around 11 feet; hence, using a reach truck provides approximately a savings of 5 feet per aisle. When renting a warehouse on a square foot basis, this is a significant amount of space.
Unique Controls
A reach truck is usually steered utilizing a rotating lever that is located on a platform beside the operator. There is another lever utilized to control the mast and for extending the mast and also to control reverse and forward. These controls are somewhat different compared to typical forklift controls.
Load Capacity
Normally, the load capacity for a reach truck is less than that of a standard forklift, depending on the type. This is mainly because of the equipment's narrow design, which can cause a very high center of gravity. When the load is raised and the mast is extended fully, this is actually true.